OceanLED 2018

*Fixture Lumens rating is a measurement of total light output from a finished lighting fixture. This measurement can only be obtained from either a Goniophotometer or an Integrating sphere. Fixture Lumens is the most reliable, professional measurement of light output. OceanLED has heavily invested in these measurement apparatus and has had all its data verified by the Lighting Association of Great Britain. ABOVE WATER MOUNTING The X Series can also be used as an exterior light for your cockpit, deck or trailer.. COMPACT AND SIMPLE DESIGN Made from a chemically resistant optical polymer with a built in driver, there is a lot packed into this compact light. SIMPLE TO INSTALL Installation needs only a small, 12.5mm hole in the hull to feed the cable through and 4 screws to hold in place. No bonding required. EASY TO CLEAN Thanks to its Tritonium coating, a simple wipe of the lens removes any underwater growth, saving hours of scrubbing each time you use your boat. FISH-STROBE MODE Exceptionally bright, randomised strobing of the light is proven to attract more fish and catch more bait. ACTIVE THERMAL CONTROL ATC prevents overheating. In the event of overheating the ATC system will reduce the LED power level in order to protect the LEDs, or in extreme cases, turn off the fixture completely. 5.4” (137mm) 0.87” (22mm) 2.91” (74mm) X4 SPECIFICATIONS BOX CONTENTS X-Series LED Light and Cable In-line Fuse Kit Mounting Screws Quick Install Guide ACCESSORIES PART 316L Stainless Steel Bezel X4 011416 4 Way V DC Power Junction Box 019901 MOUNTING RECOMMENDATIONS Boat size Up to 30’ (9m) Transom / Hull spacing 2-3’ (0.5-1m) Transom quantity 2-4 Installation depth (To top of fixture) 4-8in (10-20cm) TECHNICAL Lumens 1450 Fixture Lumens 1150 Typical LED life expectancy 40,000+ Hours Minimum-Maximum operating voltage DC 9-32V DC Current / Amp draw (DC) 12V DC 0.8A 24V DC 0.4A Approx. light penetration (avg. water quality) 20’ (6m) Approx. Light penetration (Perfect water quality) Up to 45’ (13+m) Driver type Internal, Reverse Polarity Protected PHYSICAL Total weight 350g (0.78lbs) Extension cable length (standard) 9.84’ (3m) Hole cut-out for cable entry 0.5” (12.5mm) Material Chemically resistant optical polymer Ocean LED Marine LTD / Tel +44 (0) 1455 637505 / sales@oceanled.com Ocean LED USA LLC / Tel +1 954 523 2250 / sales@oceanledusa.com