OceanLED 2018

*Fixture Lumens rating is a measurement of total light output from a finished lighting fixture. This measurement can only be obtained from either a Goniophotometer or an Integrating sphere. Fixture Lumens is the most reliable, professional measurement of light output. 60˚ BEAM ANGLE A wide-angled, focused beam lights up a large area of the water. LOW PROFILE BEZEL At only 4mm (0.16”) thick, the Alu Bronze bezel gives virtually unlimited hull mounting options. EASY TO CLEAN Thanks to its Tritonium coating, a simple wipe of the lens removes any underwater growth, saving hours of scrubbing each time you use it. ALLURE 50XFM BOX CONTENTS Allure Light In-line Fuse Kit Mounting Screws Quick Install Guide ACCESSORIES PART 2m (6.5’) Plug & Play Extension Cable 001-500753 6m (19.5’) Plug & Play Extension Cable 001-500754 Delrin Isolation Sleeve for 50XFM 001-500637 4 Way V DC Power Junction Box 019901 MOUNTING RECOMMENDATIONS Transom / Hull spacing 1-1.5m (3-5’) Transom quantity 2-6 Hull quantity 4+/side Maximum hull thickness 57mm (2.25”) Installation depth (To top of fixture) 10-20cm (4-8”) TECHNICAL Lumens 5260 Fixture Lumens 3000 Typical LED life expectancy 40,000+ Hours Minimum-Maximum operating voltage DC 9-32V DC Current / Amp draw (DC) 12V DC 3.1A 24V DC 1.5A Approx. light penetration (avg. water quality) 8.5m (27’) Approx. Light penetration (Perfect water quality) Up to 24+m (78’) Driver type External, Reverse Polarity Protected PHYSICAL Driver size (L x W x H) Excluding Connectors 180x80x50mm (7.09 x 3.15 x 1.97”) Total weight including electrical driver 800gms (1.76lbs) Extension cable length (standard-hard wired to light) 2m (6.5’) Hole cut-out 60.5mm (2.38”) Hole cut-out with Delrin Sleeve 64mm (2.52”) Mounting Tube Material Aluminium Bronze AB2 Light Cartridge Anodised Aluminium Ocean LED Marine LTD / Tel +44 (0) 1455 637505 / sales@oceanled.com Ocean LED USA LLC / Tel +1 954 523 2250 / sales@oceanledusa.com