SAROS URBAN Eclairage Extérieur 2020-2021

LEGEND AND SYMBOLS LIGHT FIXTURE INGRESS PROTECTION (IP) EXPLANATION The first digit stands for ingress protection from solid matters: 0 - Protection is not available 1 - Ingress protection from solid matters with size not less than 50 mm (accidental hand contact) 2 - Ingress protection from solid matters with size not less than 12 mm (finger) 3 - Ingress protection from solid matters with size not less than 2.5 mm (tools, cables) 4 - Ingress protection from solid matters with size not less than 1 mm (tiny tools, wire) 5 - Ingress protection from dust in the volume not affecting the item operability 6 - Overall dust ingress protection The second digit stands for ingress protection from liquids 0 - Protection is not available 1 - Protection from vertically falling water droplets (condensate) 2 - Protection from water droplets falling at the angle not exceeding 15° from the vertical plane 3 - Protection from rain droplets falling at the angle not exceeding 60° from the vertical plane 4 - Protection from water splashing from all directions 5 - Protection from water jets from all directions 6 - Protection from water identical to sea waves 7 - Ingress protection from water in case of immersion at depth up to 1 m 8 - Ingress protection from water in case of long-term immersion under pressure - Supply voltage - Dust and moisture ingress protection rating - Electric shock protection Class I (protected earth) - Electric shock protection Class II - Goods comply with all the requirements set forth in respective technical regulations of the Customs Union - LED light sources - Colour temperature - Colour rendering index - The body is made of aluminium alloy - Metal parts hot dip galvanised for protection - Other design options are available – some features, shapes and dimensions can be changed at customer's request - No light fixture or light source is included in the scope of supply, light fixtures and light sources shall be ordered separately 220V 24V IP65 CRI>80 4000K 2700K LEDCOB LED АL BODY Z N 191 190 The wiring board is designed to ease SAROS lamp posts connection to electric networks of outdoor lightning. The wiring board weight is 2,6 kg. The board has the following elements: - 3 terminal blocks for wire connection from 3 phases with the max. section up to 16 mm2, - 1 terminal block for neutral wire connection with the max. section up to 16 mm2, Circuit breaker АВВ 10А SH201L C10 Terminal block КЕ 10.1 is used for both aluminium and copper conductors. Аl 4х10 -35 mm2 / Сu 1.5 – 25 mm2 The tightening torque is 10 Nm Terminal block КЕ 10.1 is used for both aluminium and copper conductors. Аl 6х10 -35 mm2 / Сu 1.5 – 25 mm2 The tightening torque is 10 Nm Order code: MP3 - 1 terminal block for ground wire connection with the max. section up to 16 mm2, - 1 circuit breaker 10А (connected to the terminal block of one of the phases) to connect the equipment installed on the post (with the max. total power of approx. 2 kW). #PMU . XJUI B DBCMF IPMF #SBDLFU MOUNTING PLATES AND INSTALLATION KITS FOR LIGHT FIXTURES BRACKETS FOR LINE LIGHTS INSTALLATION G - KRON STAKE FOR MULTIK LIGHT FIXTURE GROUND - LOCKING CONNECTION KITS №1 (MK I) CONNECTION KITS №3 (MK III) Code KOL _ M Legend: 1 – Board with a DIN plate 2 – Circuit breaker 10А 3 – Plug for a terminal block 4 – Terminal block IEK ZNI-35 (ИЭКЗНИ-35) cameo- green 5 – Terminal block IEK ZNI-35 (ИЭКЗНИ-35) grey 6 – Terminal block IEK ZNI-35 (ИЭКЗНИ-35) blue 7 – Limiter for DIN plate 8 – Wire PV1x1.5 (ПВ1х1,5) white Order code: MPE Order code: MP WIRING BOARD FOR CONNECTION WIRING KIT FOR CONNECTION The SAROS company offers a range of twelve standard colours (powder painting technology) for steel lamp posts used with light fixtures and a range of four standard colours for cast iron lamp posts (wet painting technology). Range codes shall be specified in the product order code. The possibility of using other colours and applying a lacquer coat is subject to case-by- case consideration. STANDARD COATING COLOUR RANGE GRAY Code - GRAY/ MT GRAY Code - GRAY/MR (moire) RAL 7040 WHITE Code - W/MR (moire) RAL 9016 GRAPHITE MOIRE METALLIC Code - GRF/MM ANTIQUE SILVER Code - S/Antic ANTIQUE COPPER Code - M/Antic ANTIQUE BRONZE Code - B/Antic GREEN Code - GRN/MT GREEN Code - GRN/MR (moire) RAL 6016 RED Code - RED/MR (moire) RAL 3020 SILVER MOIRE METALLIC Code - GR/MM RAL 9006 BLACK Code - BLK/MT BLACK Code - BLK/MT (matt) Code - BLK/MR (moire) RAL 9005 BROWN Code - BRW/MT BROWN Code - BRW/MR (moire) RAL 8016 BLACK MOIRE METALLIC Code - BLK/MМ BLUE Code - BLUE/MR (moire) RAL 5010 FOR STEEL POLES FOR COAST POLES (matt)